Audi R8 Fabspeed Exhaust Installation

r8exhaustheader

It doesn’t take a math wizard to realize that 10 cylinders are better than 8, but when you can’t hear that extra liter of displacement it is a bit of a disappointment. Fortunately remedying this issue is not too difficult thanks to Fabspeed and their sport exhaust system designed specifically for the 5.2l V10 engine. As one of the more “afforadable” options out there on the market, this system comes in at just a hair over $3k. The basic construction uses an x-pipe, four resonators, and provisions for the factory V-band clamps. Also included are a few proprietary custom cut mounting brackets as well as dual exhaust exit pipes that mimic the original system.

DSC_9787

DSC_9788

DSC_9789

shifter

DSC_9797

DSC_9798

The engine configuration and exhaust placement on the R8 necessitate removal of a significant portion of the rear of the car. All of the carbon side cladding in the engine bay, the air box, tail lights, rear bumper and rebar have to be excavated in order to unearth the huge box that is the rear muffler.  Additionally, since the R8 is so well built, there are a vast amount of fasteners, almost 3 times as many on other vehicles that serve the same function. This contributes to the solid feel and keeps everything in its place.

DSC_9809

DSC_9816

A look inside the engine compartment gives you an idea how sealed off and buried the exhaust case is.  You can see the flex pipe and v band connection below with the air box out of the way.

DSC_9818

The factory exhaust removed (bottom right)
DSC_9826

Factory exhaust
DSC_9858

The Fabspeed exhaust mocked up in place just to get an idea of fit. Eventual installation requires removing and reusing all of the original and existing heat shielding which works with the aftermarket system still
DSC_9834

There was an immediate and apparent weight difference between the two exhausts, and our curiosity got the best of us so we couldn’t help but weigh the two systems. The original exhaust came in at just over 60lbs, while the Fabspeed piece was closer to 20. Obviously a significant weight reduction, however we should point out that the Fabspeed system is devoid of any catalytic convertors whereas the OEM system has several.
DSC_9836

DSC_9838

DSC_9839

DSC_9843

Almost all buttoned up
DSC_9853

Quick soundclip of installed system

Audi R8 Fabspeed Exhaust Installation

11 Responses to Audi R8 Fabspeed Exhaust Installation

  1. Your are an excellent writer. I have subscribed to your blog site because I really don’t want to miss out on your upcoming
    posts

    Here is my webpage: buy your automobile

  2. I really like going through your blog. Do you have any
    sort of easy methods to set one up??

    my blog … selling vehicle – http://myhondablog.tumblr.com/tagged/s2k,

  3. youtube.com says:

    Your website is actually fantastic. May I follow you on Facebook??

    Here is my web-site: cash for cars (youtube.com)

  4. Safe, superb weblog post. It truly has motivated to go over far more online.

  5. Hey there, are you with Facebook?? Could well be good to read through your later
    blog posts

  6. Wonderful blog post. I feel I to start out writing
    articles online once again

  7. 205400 384636This sort of wanting to come to a difference in her or his lifestyle, initial generally Los angeles Excess weight weightloss scheme is really a large running in as it reached that strive. weight loss 330312

  8. 615366 399089Just a smiling visitant here to share the enjoy (:, btw outstanding style . 753555

  9. 195629 379261There is noticeably a bundle to learn about this. I assume you created specific nice points in attributes also. 873808

  10. DMPK Assays says:

    800730 190386A very very intriguing post! Ill try to track that continues here! Thank you. 29965

  11. 646971 483768youve got an essential weblog proper here! would you wish to make some invite posts on my weblog? 875453

Leave a Reply

Your email address will not be published.

Follow Us!
Categories
Follow Us!