{"title":"F80 S55 Engine Performance","description":"","products":[{"product_id":"bms-m3-m4-s55-performance-intake","title":"BMS M3\/M4 S55 Performance Intake","description":"Finally, an affordable intake system worthy of your S55 M3 and M4! The BMS S55 Performance Intake retains everything that is good about the OEM intake including the cold air ducting and light weight heat shielding airbox bottom, but replaces the top end of the intake with higher flow ducting and quality inverted cone air filters to match.\u003cbr\u003e\u003cbr\u003e During BMS' dyno testing the BMS S55 Performance Intake performed the same or better than other S55 intakes tested posting gains of up to 10+ horsepower to the wheels at 25psi+ boost levels. Note the OEM S55 air intake flows very well from the factory so gains are mostly present at higher boost levels and higher RPM where airflow requirements are highest. In addition to freeing up some power turbo spool speed was improved, and there is an incredible sound improvement. You'll finally be able to hear your turbo spooling!\u003cbr\u003e\u003cbr\u003e nstallation is easy and fully reversible. The proprietary high flow filters can be cleaned every 15-20k miles using a S\u0026amp;B cleaning kit and will last the life of the car. BMS' intake temperature testing found no significant difference from the factory intake during both sustained cruise and full throttle operation.\u003cbr\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_BMS_F80_M3_F82_M4_S55_performance_intake_2015_2016_jpg?6863135709037586134\" width=\"100%\" height=\"auto\"\u003e \u003cb\u003eBMS S55 \/\/M Performance Intake\u003c\/b\u003e \u003cul\u003e \u003cli\u003e Adds up to 10+ Horsepower\u003c\/li\u003e \u003cli\u003e Dramatic sound improvement\u003c\/li\u003e \u003cli\u003e Super fast install and removal\u003c\/li\u003e \u003cli\u003e Improves throttle response \u003c\/li\u003e \u003cli\u003e Retains OEM airbox base as a heat shield\u003c\/li\u003e \u003cli\u003e Retains OEM cold air ducting\u003c\/li\u003e \u003cli\u003e Looks great under the hood\u003c\/li\u003e \u003cli\u003e Cleanable and reusable filter\u003c\/li\u003e \u003cli\u003e Made in the USA\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e \u003cb\u003eFITS :\u003c\/b\u003e \u003cul\u003e \u003cli\u003e 2015+ F80 M3\u003c\/li\u003e \u003cli\u003e 2015+ F82 M4\u003c\/li\u003e  \u003c\/ul\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMS_intake_Dyno_jpg?5282999397536795426\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_BMS_M3_M4_S55_performance_intake_2015_jpg?14542446252906854069\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_BMS_F80_M3_F82_M4_S55_performance_intake_2015_jpg?9843778620660319112\" width=\"100%\" height=\"auto\"\u003e \u003ccenter\u003e\u003ca href=\"http:\/\/www.burgertuning.com\/instructions\/bms_s55_intake_install_guide.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_download_install_guide_jpg?5247866259584498558\" width=\"400\" height=\"41\" border=\"0\"\u003e\u003c\/a\u003e\u003c\/center\u003e ","brand":"Burger Motorsport","offers":[{"title":"Default Title","offer_id":9626082541612,"sku":"BMSM3M4S55PI","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/b9532ef5b6133ea72799a396d101e1eb.jpg?v=1528327932"},{"product_id":"burger-motorsports-jb4-2015-m3-m4-s55","title":"Burger Motorsports JB4 - 2015+ M3 \/ M4 S55","description":"The ultimate tune for your S55 powered vehicle, the JB4 allows you to go from factory stock to full race, and everywhere in between, with the push of a button on your steering wheel. The JB4 installs and removes easily and includes many unique features not found in any other tune including user adjustable 1st and 2nd gear boost limiting, map switching in dash, electronic wastegate control, ethanol fuel support, and built in advanced CANbus based diagnostic tools. Installation is completely removable with no splicing or cutting of factory wires.   For the latest performance results, updates, firmware, and map guide be sure to visit N54tech.com.  \u003cb\u003eJB4 MAP GUIDE:\u003c\/b\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003eMap 0:\u003c\/b\u003e Disable JB4 \/ Full Pass Through Mode\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 1:\u003c\/b\u003e Stage1 map adding approximately 40whp and 40wtq across the power band on pump gas. Suitable for all stages and fuel mixtures. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 2:\u003c\/b\u003e Slightly more aggressive version of map 1 intended for vehicles with exhaust modifications and 93+ octane fuel. Can also be used with E85 and racing fuel mixtures. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 3:\u003c\/b\u003e Slightly less aggressive version of map 1 intended for vehicles running on lower grade fuels such as 91 octane. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 4:\u003c\/b\u003e OEM performance but with JB4 active for diagnostics only. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 5:\u003c\/b\u003e \/\/M low torque \/ linear throttle map. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 6:\u003c\/b\u003e Custom tuning map. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 7:\u003c\/b\u003e Race gas map. Requires 100 octane unleaded fuel and for the fuel mass connector to be installed. This map can also be used with up to 35% E85. \u003c\/li\u003e \u003cli\u003e\n\u003cb\u003eMap 8:\u003c\/b\u003e Methanol injection map. Requires BMS FSB controller or methanol kit for progressive mapping and safety systems.\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e \u003cb\u003eFITS:\u003c\/b\u003e \u003cul\u003e \u003cli\u003e2015+ F80 M3\u003c\/li\u003e \u003cli\u003e2015+ F82 M4\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e \u003ccenter\u003e\u003ca href=\"http:\/\/burgertuning.com\/instructions\/s55_jb4_install.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_instructionbutton_png?17274705805728513994\" width=\"75%\" height=\"auto\"\u003e\u003c\/a\u003e\u003c\/center\u003e","brand":"Burger Motorsport","offers":[{"title":"Default Title","offer_id":9626393313324,"sku":"BMSS55JB4","price":799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/a2d4f94d4e6e25660fa005651f31f4da.jpg?v=1528330363"},{"product_id":"m3-m4-s55-replacement-aluminum-chargepipes","title":"M3\/M4 S55 Replacement Aluminum Chargepipes","description":"BMW's new S55 motor is a modern marvel but one weakness BMS identified are the boost tubes or charge pipes that connect the turbochargers to the intercooler. Made of thin plastic these factory parts are prone to snapping apart where the flange meets the tube, splitting along the length, and\/or slipping out of their intercooler couplers.\u003cbr\u003e\u003cbr\u003e Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a flat black powder coat to match the engine bay and BMS has also incorporated a pre-capped 1\/8\" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFITS:\u003c\/b\u003e \u003cul\u003e \u003cli\u003e2015+ F80 M3\u003c\/li\u003e \u003cli\u003e2015+ F82 M4\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_jpg?4869568118643743023\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_jpg?14876984694034979516\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_jpg?3364337102699580470\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_methanol_bung_jpg?16311396463996494000\" width=\"100%\" height=\"auto\"\u003e \u003ccenter\u003e \u003ca href=\"http:\/\/www.burgertuning.com\/instructions\/BMS_S55_Chargepipe_Install.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_download_install_guide_jpg?1232789445256947118\" width=\"400\" height=\"41\" border=\"0\"\u003e\u003c\/a\u003e\n\u003c\/center\u003e","brand":"Burger Motorsport","offers":[{"title":"Default Title","offer_id":9627842347052,"sku":"BMS55ACHP","price":479.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/5306ea7de868724409b4d3a27c33955a.jpg?v=1528337309"},{"product_id":"bms-elite-m3-m4-s55-replacement-aluminum-chargepipes","title":"BMS Elite M3\/M4 S55 Replacement Aluminum Chargepipes","description":"BMW's new S55 motor is a modern marvel but one weakness BMS identified are the boost tubes or charge pipes that connect the turbochargers to the intercooler. Made of thin plastic these factory parts are prone to snapping apart where the flange meets the tube, splitting along the length, and\/or slipping out of their intercooler couplers.\u003cbr\u003e\u003cbr\u003e Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a flat black powder coat to match the engine bay and BMS has also incorporated a pre-capped 1\/8\" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFITS:\u003c\/b\u003e \u003cul\u003e \u003cli\u003e2015+ F80 M3\u003c\/li\u003e \u003cli\u003e2015+ F82 M4\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_jpg?4869568118643743023\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_jpg?14876984694034979516\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_jpg?3364337102699580470\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_methanol_bung_jpg?16311396463996494000\" width=\"100%\" height=\"auto\"\u003e \u003ccenter\u003e \u003ca href=\"http:\/\/www.burgertuning.com\/instructions\/BMS_S55_Chargepipe_Install.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_download_install_guide_jpg?1232789445256947118\" width=\"400\" height=\"41\" border=\"0\"\u003e\u003c\/a\u003e\n\u003c\/center\u003e","brand":"Burger Motorsport","offers":[{"title":"Hot Side Pipes Only","offer_id":29208090869804,"sku":"BMS55ACP-E","price":279.99,"currency_code":"USD","in_stock":false},{"title":"Cold Side J Pipe Only","offer_id":29208090902572,"sku":"BMS55JP-E","price":129.99,"currency_code":"USD","in_stock":false},{"title":"Hot Side Pipes and J Pipe","offer_id":29208090935340,"sku":"BMS55ACP-JP-E","price":399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/M3_M4_BMW_CP_CP_540x_0426bba4-4ea4-4f92-9d07-965cd44d21e7.jpg?v=1561059984"},{"product_id":"bms-m3-m4-s55-replacement-aluminum-chargepipes","title":"BMS M3\/M4 S55 Replacement Aluminum Chargepipes","description":"BMW's new S55 motor is a modern marvel but one weakness BMS identified are the boost tubes or charge pipes that connect the turbochargers to the intercooler. Made of thin plastic these factory parts are prone to snapping apart where the flange meets the tube, splitting along the length, and\/or slipping out of their intercooler couplers.\u003cbr\u003e\u003cbr\u003e Our BMS S55 replacement chargepipes are made from heavy duty aluminum and are designed with CNC flanges and a protruding lip for a secure OEM like fit. They are finished in a flat black powder coat to match the engine bay and BMS has also incorporated a pre-capped 1\/8\" NPT bung in to each pipe. Includes replacement heavy duty couplers, hose clamps, and all hardware required for the installation.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFITS:\u003c\/b\u003e \u003cul\u003e \u003cli\u003e2015+ F80 M3\u003c\/li\u003e \u003cli\u003e2015+ F82 M4\u003c\/li\u003e \u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_jpg?4869568118643743023\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_jpg?14876984694034979516\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_jpg?3364337102699580470\" width=\"100%\" height=\"auto\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_M3_M4_BMW_chargepipes_s55_F80_F82_2015_methanol_bung_jpg?16311396463996494000\" width=\"100%\" height=\"auto\"\u003e \u003ccenter\u003e \u003ca href=\"http:\/\/www.burgertuning.com\/instructions\/BMS_S55_Chargepipe_Install.pdf\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/t\/6\/assets\/description_image_download_install_guide_jpg?1232789445256947118\" width=\"400\" height=\"41\" border=\"0\"\u003e\u003c\/a\u003e\n\u003c\/center\u003e","brand":"Burger Motorsport","offers":[{"title":"Hot Side Pipes Only","offer_id":29208090968108,"sku":"BMS55ACP","price":279.0,"currency_code":"USD","in_stock":true},{"title":"Cold Side J Pipe Only","offer_id":29208091000876,"sku":"BMS55JP","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Hot Side Pipes and J Pipe","offer_id":29208091033644,"sku":"BMS55ACP-JP","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/20181023_164216_540x_77c5295c-5f17-489e-ac15-3060f2578e46.jpg?v=1561059985"},{"product_id":"csf-high-performance-heat-exchanger-w-rock-guard-bmw-f8x-drop-in","title":"CSF High Performance Heat Exchanger w\/ rock guard - BMW F8X (Drop in)","description":"\u003cul\u003e\n\u003cli\u003e2-row 42mm core (dual core) featuring CSF’s exclusive B-tube technology\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore features an ultra-efficient fin with 6.5mm fin height and multi-louvered design for maximum surface area contact\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDual-pass flow structure allows the coolant to flow across the core of the radiator 2 times before exiting the radiator for the lowest outlet temperature possible (OEM style design)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined, OEM style “quick-connect” inlet\/outlet connections\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCNC machined, OEM style mounting brackets \u0026amp; fittings for superb fit and durability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncludes removable aluminum rock guard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAll-aluminum race style drain plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 hour “mirror finish” hand polish\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e“Drop-in fit” requiring no modifications to install. Accepts all attaching OEM components including “quick-connect” hoses, mounting brackets, OEM X-brace, and all air ducting\/shrouding.\u003cbr\u003e CSF #8075 – 45 row design – no modifications necessary\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLife-time warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF80 M3\u003c\/li\u003e\n\u003cli\u003eF82 M4\u003c\/li\u003e\n\u003cli\u003eF83 M4\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":31534694826033,"sku":"csf8075","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/DSC_0350.jpg?v=1577986055"},{"product_id":"csf-high-performance-dual-pass-charge-air-cooler-bmw-f8x-drop-in","title":"CSF High Performance Dual Pass Charge Air Cooler - BMW F8X (Drop in)","description":"\u003cul\u003e\n\u003cli\u003eWorld’s 1st cast end tank designed top mount charge-air-cooler for the BMW S55 engine in the BMW F8x m3\/m4 (F80 m3, F82\/F83 m4)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eMultiple air dividers cast into both the hot\/cold side endtanks for optimized air flow through the custom designed CSF liquid-to-air intercooler core (CFD analysis and testing completed to ensure optimal performance)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e**60% increase in core size compared to the OEM cooler.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLeft\/right, cross-flow, dual-pass core configuration with 2-stage water cooling for maximum efficiency and intake temperature reduction (vs. OEM single-pass vertical-flow design)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned with 3D scanning \/ rapid prototype technology to ensure precise fitment and maximum surface area utilization.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e“Drop-in fit” design for an easy \u0026amp; quick plug-and-play installation. Complete with OEM style “Quick-Connect” water connections and sensor ports.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFinished with a professional “Crinkle Black” powder coat finish (CSF #8082). Also available in raw aluminum finish with option for custom powder coating available (CSF #8082R).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLifetime warranty.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDesigned, developed, and tested in conjunction with R\u0026amp;D partners: VF Engineering\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eF80 M3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eF82 M4\u003c\/li\u003e\n\u003cli\u003eF84 M3\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CSF","offers":[{"title":"Black","offer_id":31534694924337,"sku":"csf8082","price":1695.0,"currency_code":"USD","in_stock":true},{"title":"Raw","offer_id":31534694957105,"sku":"csf8082R","price":1695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/products\/DSC_0331-1-1.jpg?v=1577985597"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0024\/4898\/2060\/collections\/EnginePerformance_Section_480px_791e01bf-a5dd-498e-b116-c873c6e9a787.png?v=1565210059","url":"https:\/\/blackforestindustries.com\/collections\/f80-s55-engine-performance.oembed","provider":"Black Forest Industries","version":"1.0","type":"link"}