APR A6 2.7T ECU Upgrades

APR ECU Upgrade for Audi A6/Allroad 2.7T

APRA6ECU
Regular price $599.99 $599.99

The ultimate chip upgrade for the A6 2.7T engine is available from APR. After months of long nights and many hours of dyno work we are pleased to offer you chip tuning that is second to none. We have worked hand in hand with many customers to deliver a chip that works. Expect huge increases in low-end torque, improved throttle response and a smoother, more powerful top end. The APR A6 2.7T chip is available in a 1.0 Bar configuration. The chip is designed to operate within the turbochargers' efficiency range. Some APR chips are available in an octane specific version for the octane of gasoline that you typically run in your car. The power that the chip makes also depends on which ECU is in your vehicle. Please see the chart below for more information. Year Model Engine 91 Octane Chipped 93 Octane Chipped DirectPort Available Price 2000-04 A6 ALL 2.7T 307hp/366lb-ft 318hp/382lb-ft Y $599.00 2002- A6 BAS 4.2* 340hp/302lb-ft 352hp/312lb-ft Y $599.00 *All 4.2 ECU Upgrades include all the EMCS program options for free. **Speed and Rev Limt changes only. All APR chip upgrades use encryption, which serve several purposes. First, it keeps prying eyes out of our software and prevents lesser companies from copying the chip and degrading the product. Secondly, the encryption prevents the dealer from flash programming the ECU. Also, all APR software is undetectable to a dealers VAG diagnostic tool. All APR chip software comes with lifetime free upgrades. There is also a lifetime warranty against defects in the software or soldering. All chip upgrades have a 30-day Money Back Guarantee. -------------------------------------------------------------------------------- EMCS EMCS is available for this car. EMCS is APR's revolutionary patent pending Enhanced Modular Chipping System. EMCS is an industry leading technology that brings many new features to the automotive enthusiast. This technology was developed exclusively by Audi Performance & Racing, LLC and demonstrates APR's continued commitment to lead the industry with the most technologically advanced products available. Want chipped mode? Want to be able to switch back to your stock settings? Want a race mode to run 100 octane fuel at the track? How about a valet mode that limits power? EMCS is the lone technology on the market that can give you all of these options. No changing of the chip or ECU is required. These programs are available at the touch of a button. APR has taken your cruise control buttons and utilized them for this function. Your cruise control will continue to function as normal, but will give you the ability to scroll through the programs you have purchased on your APR chipped ECU. The procedure is simple and involves only two steps. Step 1: Press and hold the "set" button on your cruise control. After approximately five seconds, the "check engine" light on your dash will begin to blink once per second. This will tell you that you are activating program one. This blinking sequence will continue for approximately five seconds. After this five second interval, the "check engine" light will begin blinking twice per second. This will indicate that you have activated the second program. This process is continued to access any remaining programs you may have purchased. (three blinks = program three, four blinks = program four). Step 2: Once you have activated the desired program, simply release the "set" button. The "check engine" light will go off, and you will be locked in that program until you change it. It's that simple. APR's EMCS is a truly modular system that allows for future enhancements and features to be added as they are developed without the need for additional hardware. EMCS makes the following advanced features possible: EMCS Circuit Board and Programmer End EMCS Home Programmer EMCS System FlipSwitch Enables you to swap between two or more engine programs on-the-fly using the cruise control stalk. All cars have stock and standard chipped program versions available. Valet, race-gas, and other specialty programs are available for some models. Fault Code Erase/Throttle Body Alignment (FCE/TBA) Fault Code Erase allows you to erase and reset engine related trouble codes without having to use a specialty tool. Throttle Body Alignment allows you to manually perform throttle-body adaptation. Security Lockout Prevents unauthorized personnel from accessing EMCS functions. The user may select any 1 to 4 digit security code. The security code is entered using the cruise control buttons. User Reprogramming and Reconfiguration Gives the user the ability to reprogram their ECU with the latest software updates and to reconfigure their ECU for different preferences or features. This function requires the optional programming adaptor. EMCS PRICING All APR chips now include EMCS hardware. EMCS options are available at an additional cost over the normal price of a chip. Please remember that even if you do not purchase any of the following options, you will still be able upgrade to these options from most any internet accessible computer at a later date. Above the price of the chip for your car, the following options can be added to your ECU: FlipSwitch Technology For a total of 2 programs (i.e. - Stock and Chipped) $149 For a total of 3 programs $219 For a total of 4 programs $289 Other Available Options Fault Code Erase/Throttle Body Alignment (FCE/TBA) $59 Security Lockout $59 Home Computer Upgrade Interface $99 Please Call for an appointment.


SIMILAR PRODUCTS: