AST Suspension Lowering Springs - 2021+ BMW G80 M3
AST Suspension Lowering Springs are a direct swap for the factory springs on your G80 M3, lowering the center of gravity and tightening up body roll while keeping the ride quality you are used to from the OEM setup. Each spring is engineered specifically for this chassis rather than adapted from a universal design, so the drop and spring rate are matched to the car from the start.
Important Compatibility Information
- EDC dampers: Compatible with the factory Adaptive M dampers with OEM EDC when the vehicle is equipped with them.
Construction
- Cold-wound from premium high-tensile chromium-silicone wire on Wafios coiling machines, then heat treated to increase hardness and relieve internal stress from winding
- Shot peened and phosphate treated before powder coating for long-term corrosion resistance
- Progressive spring rate
- Each spring is blocked and computer tested before shipping to reduce settling after installation
- TUV certified on most applications, with certificates available on request
What's Included
- AST Suspension front and rear lowering springs (x4)
Reused from your vehicle: Factory struts, shocks and suspension hardware.
Installation Notes
- Professional installation is recommended.
- Set sufficient spring preload before lowering the car back to the ground, since AST ships these springs without preload applied.
- Have the alignment checked after installation.
Product Specifications
- Manufacturer: AST Suspension
- SKU: A03L ASTLS-21-080
- MPN: ASTLS-21-080
- Application: BMW G80 M3
- Front lowering: Approx. 30mm (AST published figure)
- Rear lowering: Approx. 15mm (AST published figure)
- Spring design: Progressive
- Manufacturing: Cold-wound on Wafios coiling machines in the Netherlands
Frequently Asked Questions
Will these springs work with my factory adaptive dampers?
Yes, they are compatible with the factory Adaptive M dampers with OEM EDC.
How much will my G80 M3 be lowered?
AST publishes approximately 30mm front and 15mm rear. Actual ride height varies slightly with vehicle equipment and wheel and tire setup.
Is this a coilover kit?
No, this is a spring-only kit that reuses your factory struts and dampers.
Can I add camber plates with these springs?
Yes, AST's adjustable top mount camber plates are designed to work alongside AST's fixed and adjustable lowering springs on this chassis.
Do I need an alignment after installation?
Yes, an alignment check is recommended any time ride height changes.