SPA TURBO Forged flat top piston and rings set 83.5mm VW 2.0L 8V + VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp) + Decompression Head Gasket Spacer - 0.5mm + Head stud set

Innovative high performance piston skirt design that provides:

1. Smaller piston to bore clearance 

2. Less noise

3. Better ring seal

4. Higher power

5. Durability

Features:

Anti detonation grooves: protect the top ring by disrupting detonation waves and reduce piston-cylinder contact in high temperatures and engine RPM conditions.

Accumulator groove: accumulates residual combustion gasses reducing top ring flutter and improving seal.

Pin oil lubrication by broaches and oiler to reduce friction and increase durability.

Super A Piston Pin for VW827 (63.45mm) – 4pcs set

For VW 827 engines (Super A pistons)

Dimensions: 63.45mm x 20mm (length x O.D.)

Average unit weight: 116g (4.09 oz)

Rated for 1.000hp

Made from special steel alloys that combines optimal mass with high resistance.

Piston rings 83,5mm set

Contains 01 complete set for 4 cylinder engine.
Compatible with SPA Super A, with 1.5mm / 1.5mm and 2mm channels.
Ring thickness:
1st ring 1.5mm - Made of carbon steel, which is 35% more resistant than cast iron and on average 30% lighter. With DLC (Diamond-Like Carbon) treatment, which is the application of carbon particles, whose physical and chemical properties are very close to those of the diamond, providing greater resistance to the material and reducing the friction of the surface, which significantly reduces friction when working against other surfaces.
2nd ring 1.5mm - Made of cast iron.
3rd ring 2.0mm - Manufactured in 3 pieces, which guarantees easy maintenance, better stability in the control of the oil film and improves the oil removal through the piston lubrication holes, as it has a better area for displacing this oil.

VW 144mm x 20mm Super A connecting rod set 3/8" bolt (1000hp)

• For AGU TDI AEB 8V 16V engine, and others VW engines with OEM 144mm con rods.
• Center to center distance: 144mm (5.669").
• Big end size: 50.60mm (1.992").
• Small end size: 20mm (0.787").
• For up to: 1000hp.
• SPA800 3/8" bolts
• Tightening torque: 6 kgfm (43,4 lbft).
• 4340 forged steel.
• 595g (20.98 oz) each rod with bolts
• Set with 4 pieces.
• 3 oil channel at the small end and 3 oil channel at the big end for maximum pin lubrication.

All SPA Turbo connecting rods come with CMD Extreme Pressure lubricants.

About CMD Extreme Pressure lubricants:

When the operation requires extreme pressure, all ordinary lubricants break down and allow metal-to-metal contact with consequent scoring, frictional heat, work and cutting tool damage.
They will not corrode the finest surfaces nor will they mulsify with cooling liquids. But these facts are not the most remarkable feature of CMD lubricants. The truly outstanding property of CMD is its ability to withstand extreme pressures!
CMD EXTREME PRESSURE lubricants are regularly used from 40,000 to 50,000 psi.

VW 8v/16v ABA ABF MLS decompression Head Gasket Spacer - 0.5mm

• • Special cylinder head gasket for turbo conversion
  • With this special Turbo multilayer metal cylinder head gasket
  • The compression reduction is already integrated in the seal.
  • (Ground and coated)
  • Will accept pistons up to 84.00mm overbored sized, can be used with smaller bores with no problem too.
  • Compression ratio NEW will depend on the engine used
  • Manufacturer: SPA TURBO
  • Engine Code: All 2 liters   Blocks of VW 8V and 16V (some small modifications may be necessary in some cases)
  • 9A, 6A, ACE, 2E, ADY, ACX ABF, AGG, AKR, ABA, ABBOT, ADW, AAD, AAE, CAST OFF, 3A, SD.
  • Similar to OE numbers/Comparable numbers of manufacturers
  VW: 048103383B
  VW: 053103383
  VW: 053103383A
  VW: 053103383B
  VW: 53103383            
  ELWIS ROYAL: 0056010
  PAYEN : BT810
  MEGA CAR: 101030383048B
  CORTECO: 414604P
  ELRING: 915.590
  ELRING: 915.599
  FEBI BILSTEIN: 15558
  GLAZIER: 50151
  GOETZE: 30-027257-20
  REINZ: 61-28290-00
  SPESSO: 21194/7620
  SWAG: 32 91 5558
  REINZ: 61-29305-00
  • Available in 0.9mm; 1.5mm; 2.0mm, 2.5mm and 3.4mm thickness
  • We're the  VW Turbo experts!

VW MKIII GTI AGG 2.0L 8v SOHC 136mm head stud set

• 136 mm VW cylinder head stud set
• Installs using 3/16 Allen wrench
• 12 point precison ground heat treated nuts 
• 12 point Nuts and washers precision ground
• 180.000 psi tensile strength
• M11 Thread studs, please be sure that your OEM bolts have the same thread before purchase
• Replaces 116mm OEM bolts
• Maximum Torque - 72 ft/lb